Explore the Euro PM2026 Scientific Papers by Topic
Euro PM2026 brings together peer-reviewed scientific contributions spanning the full spectrum of powder metallurgy and particulate materials. Browse the key technical themes below — from additive manufacturing and directed energy deposition to hard metals, energy applications, and sustainability — and discover the research shaping the future of the industry.
Additive Manufacturing
The largest track at Euro PM2026, covering laser powder bed fusion, binder jetting, directed energy deposition, sinter-based AM, process monitoring, simulation, and powder feedstocks for additive processes.
Additive Manufacturing – Euro PM2026 Papers
Assessing The Potential For Repurposing Industrial Press And Sinter WC-Co Grades For Binder Jetting Fabrication
→ Mr Leite Francisco (University of Aveiro, Portugal)
Carbon Footprint Of Continuous Metal Powder Production For Additive Manufacturing
→ Mr Mostaghimi Farhad (SMS group GmbH, Germany)
Compositionally Controlled Spray-dried Feedstock Powders For In-situ Alloying Via L-DED
→ Dr Calisir Ilkan (PowderLoop Technology Limited, United Kingdom)
Definition Of Tolerance Bands Of Powder Quality In Metal Additive Manufacturing For Designing Reconditioning Processes
→ Dr Maurer Oliver (Saarland University, Germany)
Industry 5.0 And Powder-Based Additive Manufacturing: Towards Human-centered And Sustainable Innovation
→ Mrs Ukwu Cynthia (University West, Sweden)
Recycling And Characterization Of AlSi7Mg And AlSi10Mg AM Rest Material For Powder Production And Reuse In Additive Manufacturing
→ Dr Ing Brabie Liviu (Swerim AB, Sweden)
Sustainable Production Of M300-Equivalent Maraging Steel From Recycled Scrap Via G-MEX
→ Mr Caballero García Gabriel José (Universidad Carlos III de Madrid, Spain)
Ultrasonic Atomization Of Recycled Aluminum Feedstock: From Single Alloy Scrap To Cross-Scrap Alloy For Plasma- And Powder-based Directed Energy Deposition
→ Mr Vieweger Daniel (Technische Universität München, Germany)
Aluminium Scandium Alloys Development For Hydrogen Applications
→ Mr Delignon Benjamin (Gränges Powder Metallurgy, France)
Evaluation Of In-situ PBF-LB Developed Alloys For Hydrogen-rich Environments
→ Dr Gil Murillo Emma (Lortek, Spain)
Comparison Of MIM And Binder Based Additive Manufacturing (FGF) For Processing The Complex Mg-Alloy Mg-1.8Y-1.6Gd-0.4Ca-1Ag-0.6Zn For Biomedical Applications
→ Dipl-Ing Wolff Martin (Helmholtz-Zentrum Hereon, Germany)
Microstructure-Driven Qualification Of Sintered Titanium In MIM, LMM, And CMF
→ Ing Marter Tim (Element 22 GmbH, Germany)
Topology Optimization – Design Of Personalized Osteosynthesis Implants Via Additive Manufacturing
→ Dr Viderscak Dalibor (University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, Croatia)
Advancing Metal Injection Moulding For Underexplored Superalloys: Hastelloy C-22
→ Prof Dr Herranz Gemma (Universidad de Castilla-La Mancha, Spain)
A Comparative Study Of Microstructure And Mechanical Properties Of 300M Steel Produced By Coaxial Laser Directed Energy Deposition Using Powder And Wire
→ Dr Bhattiprolu Satish (TWI Technology Centre, United Kingdom)
Advancing Green Titanium Production: Characterization And Processing Performance Of Velta Ti-Derived Powders
→ Dr Checa Luna (TECNALIA, Spain)
Building A Framework For ODS Alloy Design: A Case Study For ODS Hastelloy X
→ Mr Aydemir Abdullah (Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland)
Manufacturing Of Complex Aircraft Engine Components Via MoldJet: CM247LC Nickel Superalloy Feedstock Development And Property Evaluation
→ Dipl-Ing Herzer Niklas (Fraunhofer IFAM Dresden, Germany)
Material Extrusion Of Titanium Metastructures For Next-Generation Aerospace Components
→ Ing García Álvaro (Universidad de Castilla-La Mancha, Spain)
Innovative Magnetic Materials For E-mobility
→ Prof Dr Poskovic Emir (Politecnico di Torino, Italy)
Methods For Improving The Operational Behavior Of Binder Jetting Gears Made Of 17-4 PH
→ Mr Breuer Emil-Elias (MTI of RWTH Aachen, Germany)
Additive Manufacturing Of NiTi-Based Shape Memory Alloys For Functional Components
→ Dr Lupi Giorgia (Politecnico di Milano, Italy)
Magnetic Field-Assisted Additive Manufacturing Of Anisotropic Permanent Magnets
→ Dipl-Ing Valy Lilla (RHP-Technology, Austria)
Manufacturing Of Spinodoid Structures Using Laser Powder Bed Fusion
→ Ms Kancharla Deekshitha (Technical University of Dresden | Fraunhofer-Institute of Materials and Beam Technology, Germany)
Multi-layered Coating Production Through Laser Processing Of Inconel-loaded Polymer Films
→ Mr Matos Carlos (University of Aveiro, Portugal)
Plasma Powder Deposition Of Functional Metallic And Magnetic Coatings On Polymeric Substrates
→ Mr Curti Pier Paolo (RHP Technology GmbH, Austria)
Processability Of AlNiCo 8 Magnets Via Laser Powder Bed Fusion Additive Manufacturing
→ Dr Reijonen Joni (VTT Technical Research Centre of Finland Ltd., Finland)
Sinter-based And Powder Bed Fusion Additive Manufacturing Of Fe6.5Si
→ Prof Dr Carreno-Morelli Efrain (University of Applied Sciences and Arts Western Switzerland, Switzerland)
Surface Modification Of Metal Parts Using DED Method
→ Dr Kim Hyun-Gil (InssTek, Inc., Korea, Republic of)
Investigation Of A Novel Powder-metallurgical Processing Route For The Additive Manufacturing Of High-nitrogen Martensitic Stainless Steels
→ Ms Garthe Sophia (Chair of Materials Technology, Ruhr-University Bochum, Germany)
Microstructure Evolution Following HIP Post-treatment Of LPBF-processed Ti-6Al-4V Reinforced With Nano Yttria-stabilized Zirconia For Structural Applications
→ Dr Hocini Azziz (LSPM Laboratory – CNRS UPR3407, France)
Orbital Friction Processing Of High Strength Steels And Alloys For PM, AM & HIP Applications
→ Mr Jackman Stuart (Jackweld Limited, United Kingdom)
Removal Of The PBF-LB Fraction From PM HIP Powder, And Its Effect On PM HIP Material Properties
→ Dr Mellin Pelle (Swerim AB, Sweden)
Surface Finishing Of PBF-LB Stainless Steels Using Chemical And Chemical-Mechanical Polishing In Combination With Hot Isostatic Pressing (HIP) For Improved Mechanical Performance
→ Dr Diaz Agustin (REM Surface Engineering, USA)
The Role Of The PBF-LB Scanning Strategy In The Fatigue Performance Of HIP-Densified Duplex Steel Shell-Core Structures
→ Mr Koob Jonas S. (Institute for Materials Applications in Mechanical Engineering at RWTH Aachen University, Germany)
A Modular Additive Sintering Concept For Functionally Integrated Components
→ Dipl-Ing Hutsch Thomas (Fraunhofer IFAM Dresden, Germany)
Cobalt Incorporation In 3D-Printed Zirconia Catalysts: From Support Coating To Single-Step Direct-Ink Writing
→ Dr Fargas Ribas Gemma (UPC, Spain)
Influence Of Heat Treatment On The Properties Of A Ti6Al4V-10wt%WC Metal Matrix Composite Fabricated Using Selective Laser Melting
→ Prof Sacks Natasha (Stellenbosch University, South Africa)
A Comparative Review Of Simulation Techniques For Powder Bed Fusion Additive Manufacturing
→ Ing Burkhart Marcel (University West, Sweden)
A Comparative Study Of The Microstructure & Mechanical Properties Of Copper Composites Manufactured By Laser Melting Deposition & Powder Metallurgy Techniques
→ Prof Dr Elkady Omayma (Central Metallurgical R&D Institute (CMRDI), Egypt)
A First-Principles Multiscale Framework For Modeling The Synthesis Of Additive Manufacturing Alloys Via Hydrogen Direct Reduction Of Oxide Precursors
→ Mr Agyekum Emmanuel (KTH Royal Institute of Technology, Sweden)
Additive Manufacturing In The Cycling Industry: A Review Of Opportunities Using Powder And Filament-Based Feedstock Technologies
→ Ing Doll Niklas (University West, Sweden)
Additive Manufacturing Of Dievar Steel Plungers For Glass Industry Applications
→ Mr Santo Ricardo (CDRSP, Portugal)
Additive Manufacturing Of Metal Matrix Composites: Enhancing The Printability Of High-Strength Aluminum And Meeting MMC Demand
→ Mr Yadegari Mohammadjavad (Politecnico di Torino, Italy)
Advanced FEM Framework For Sintering: Automated Material Calibration And Geometry Compensation For First-Time-Right Manufacturing
→ Dr Rodríguez Páez Jorge (CEIT, Spain)
Alternative Debinding And Sintering Atmospheres For Stainless Steel 17-4PH, Produced By LMM
→ Prof Dr Gierl-Mayer Christian (TU Wien, Austria)
AM Fabrication Of Tool Steel From Water Atomized Powder Blends By Electron Beam Powder Bed Fusion
→ Dr Ing Kirchner Alexander (Fraunhofer IFAM, Germany)
An Alternative Depowdering Method For SS316L Complex Parts Manufactured By Binder Jetting Technology
→ Ing Dávila Isaac (TECNALIA, BRTA, Spain)
An Integrated In-Situ Monitoring, CFD And AI Framework For Closed-Loop Control In Laser Powder Bed Fusion
→ Dr Liu Yan (Simtec Soft Sweden AB, Sweden)
CALPHAD-Guided Ultrasonic Atomisation Of Novel Lead-Free Brass Powders For DED Applications
→ Ing Ribeiro Bernardo L. (DEMM | FEUP – Faculty of Engineering of the University of Porto, Portugal)
Centrifugally Atomized Powder Performance In Traditional And Large-Format Powder Bed Fusion And Directed Energy Deposition Applications
→ Mr Hash Mark (Ervin Industries, USA)
Combinatorial Development Of Al-based Alloys Using DED Technology
→ Dr Reverte Palomino Eduardo (Institut Jean Lamour – University of Lorraine, France)
Comparative Study On DED-LB|M Processing Of The Martensitic Hardenable Tool Steel X38CrMo7-2 Using Flux-Cored Wire- And Powder-Based Feedstock
→ Mr Hann Jonathan (University of Wuppertal, Germany)
Corrosion Resistance And Mechanical Properties Of In-situ Alloyed Powder Blends In PBF-LB|M
→ Mr Norda Michael (Fraunhofer IFAM, Germany)
Discrete Element Method Simulation Of Powder Deposition: Influence Of Recoater Geometry On Laser-Powder Bed Fusion
→ Mr Trodler Thorben (Saarland University, Germany)
Design, Characterization And Mechanical Performance Of Uniform And Graded TPMS Lattices Manufactured By Laser Powder Bed Fusion
→ Mr Taghian Mohammad (Department of Management and Production Engineering, Politecnico di Torino, Italy)
Development Of Aluminium Powders Production Methods Via VIGA Atomisation Using Combined Numerical And Experimental Approaches
→ Ing Durand Raphaël (IRT M2P, France)
Effect Of Binder Content And Design On Densification
→ Mr Molins i Duran Nil (AMES, Spain)
Effect Of Fumed Silica Addition On The Physical Properties Of Inconel 718 Powders And The Mechanical Properties Of LPBF-Fabricated Parts
→ Mrs Sorucu Irem Sebnem (Dokuz Eylul University | SentesBIR AS, Turkey)
Effect Of Laser Energy Distribution On The LPBF Processing Of Functionalized High Strength Alloy
→ Mr Sandoval Vargas Neyder Aleixer (Universidad Carlos III de Madrid, Spain)
Effect Of Support Surface Roughness On Sintering-Induced Distortion In Binder Jetted Products
→ Ing Elabbassi Amani (University of Trento, Italy)
Effect Of The Atomising Gas Temperature On The Surface Characteristics Of IN713C Powders For Electron Beam Powder Bed Fusion
→ Dr Iturriza Inigo (Ceit, Spain)
Elevated Temperature Tensile Properties Of Nano Oxides Dispersion Strengthened Ferritic Steel Processed By Novel Direct Powder Forging Technique
→ Mr Pal Himanshu (Indian Institute of Technology Roorkee, India)
Feasibility Of Co-Sintering 316L And 430L Stainless Steels Using Lithography-based Metal Manufacturing
→ Ms Gasanova Viktoriia (Metshape, Germany)
Feasibility Of Designing An Aluminium Fly-fishing Reel For Manufacture By Laser Powder Bed Fusion
→ Prof Sacks Natasha (Stellenbosch University, South Africa)
Influence Of Binder In Metal Binder Jetting Of Copper
→ Ing Reineke Lea (Fraunhofer IFAM, Germany)
Influence Of Nickel Addition On The Wear Performance Of D2 Tool Steel Manufactured By Laser Powder Bed Fusion
→ Mr Santos Simão (University of Aveiro, Portugal)
Influence Of Nitrogen Content On Duplex Microstructure Formation In Additively Manufactured Duplex Stainless Steel 1.4462
→ Mr Sukhiyan Sheela Akhil (Foundry Institute, RWTH Aachen University, Germany)
In-situ 3D Rendering Of Binder Jetting Parts For Real-time Dimensional Inspection
→ Ing Alberdi Nerea (Tecnalia BRTA, Spain)
Integrated Alloy Design And Additive Manufacturing Of Low-Density Fe-Mn-Al-Ni-Cr-C Steel: Gas Atomization, Laser Directed Energy Deposition, And Microstructure-Property Relationships
→ Dr Ali Mohammed (VTT Technical Research Centre of Finland Ltd, Finland)
Integrated Optimization Of Density, Mechanical Performance, And Build Rate In Laser Powder Bed Fusion Of AlSi10Mg
→ Mr Taghian Mohammad (Department of Management and Production Engineering, Politecnico di Torino, Italy)
Low-Cost Powder For Binder Jetting Technology
→ Dipl-Ing Azurmendi Naiara (TECNALIA BRTA, Spain)
Material Selection In Sinter-Based Processes Compared To PBF-LB – An Overview
→ Dr Ing Studnitzky Thomas (Fraunhofer IFAM, Germany)
Mechanical Characterization Of An In-situ Alloyed Carbide-rich Tool Steel From Powder Blends Produced By PBF-LB|M
→ Mr Bürgi Oliver (RWTH Aachen, Institute for Materials Applications in Mechanical Engineering IWM, Germany)
Mechanical Performance Of AM And Rolled 316L In Room Temperature And Liquid Hydrogen Environments
→ Dr Liu Yijun (MTC – The Manufacturing Technology Centre, United Kingdom)
Microstructure And Mechanical Performance Of Inconel 718: A Review Of Powder-based Additive Manufacturing Processes Under Heat Treatment Conditions
→ Ing Nwanna Ikenna Stephen (University West, Sweden)
Microstructure And Mechanical Properties Of A N-doped Co-free CrFeMnNi High Entropy Alloy Built By L-PBF
→ Dr L’Hostis Jules (École des Mines de Saint-Étienne, France)
Mitigation Of Carbon-Induced Cracking In LP-DED Repair Of Ductile Cast Iron Components Using Buffer Layers And Graded Deposition Strategies
→ Dr Amirabdollahian Sasan (Trentino Sviluppo (ProM Facility), Italy)
Multi-material Additive Manufacturing Through Selective Powder Deposition
→ Dr Batista Catarina (Centre for Rapid and Sustainable Product Development, Polytechnic University of Leiria, Portugal)
Multiphysics Modeling Of Shell Printing In Binder-Jetted 17-4PH Stainless Steels
→ Mr Sang Ziping (IAPK an der RWTH Aachen e.V., Germany)
New Improvements To The Additive Manufacturing Module In Thermo-Calc: EBM Simulations And Improved Powder Property Considerations
→ Dr Lancelot Carl-Magnus (Thermo-Calc Software AB, Sweden)
New Laser 3D Printed Multiprincipal Beta Ti-33Nb-33Zr Alloy From Ultrasonic Atomized Powders
→ Prof Dr Afonso Conrado Ramos Moreira (Universidade Federal de São Carlos (UFSCar), Brazil)
Plasma-Based Additive Manufacturing And High-Temperature Performance Of An In-situ Alloyed Zr-Containing, Al-Free Refractory High-Entropy Alloy
→ Dr Belei Carlos (RHP-Technology GmbH, Austria)
Processability And Densification Of G91 Steel Feedstocks Via Granulated Material Extrusion
→ Mr Barbas David (Universidad Carlos III de Madrid, Spain)
Processing Of Titanium Via Sinter-Based Additive Manufacturing: The Influence Of The Powder And The Binder System
→ Mr Villemur Juan (Universidad Carlos III de Madrid, Spain)
Recycling Of Waste Additive Manufacturing Metal Powders For The Large-Scale Production Of Intermetallics By Electromagnetic Field Assisted Techniques
→ Dr Ing Veronesi Paolo (University of Modena and Reggio Emilia, Italy)
Relationship Between Energy Density And Properties Of The Fabricated Parts In L-PBF Using Water-Atomized Powder
→ Mr Itotsubo Keisuke (EPSON ATMIX Corporation, Japan)
Sinter-Based Additive Manufacturing Of Nitronic® 50 High-Nitrogen Stainless Steel
→ Dr Sainz Shandra (CEIT, Spain)
Sintering Evolution And Densification Mechanisms Of Binder Jetting 17-4PH Stainless Steel: A Synchrotron-Based Study
→ Dr Ing Meza Alberto (IMDEA Materials Institute, Spain)
Size Matters In LMM: Influence Of Particle Size On Printing Performance And Sintered Properties
→ Dipl-Ing Scheibler Jakob (Fraunhofer IFAM, Dresden Branch, Germany)
Sound Of Porosity: Unlocking Local Acoustic Signatures Of Porosity In LPBF Via Low-Cost Sensing And Explainable AI
→ Dr Ing Ahar Ayyoub (Flanders Make, Belgium)
Surface Functionalization Of Al-Ti-Mg Powders With Boron Nanoparticles To Enable In-Situ TiB₂ Formation During Laser Powder Bed Fusion
→ Dr Lupi Giorgia (Politecnico di Milano, Italy)
Surface Integrity Optimization Of Additively Manufactured Titanium Alloy: Process Control And Post-Treatment Strategies
→ Ms Khorramian Mahta (Management and Production Engineering (DIGEP), Politecnico di Torino, Italy)
Sustainable Additive Manufacturing Of Maraging Steels Via In-Situ Alloying In LPBF Using Commodity Alloys
→ Ing Safarloo Sama (IMDEA Materials Institute, Spain)
Thermal Aging Behavior Of Bulk And Thin-Walled 316L Structures Fabricated Via L-PBF For Heat Exchanger Applications
→ Mr Maurin Maxime (Laboratoire Georges Friedel, France)
Thin-Walled Tungsten Structures Fabricated By Electron Beam Powder Bed Fusion
→ Mrs Ghorbani Mohadeseh (Mid Sweden University, Sweden)
Hard Metals & Cermets
Research on WC-Co cemented carbides, cermets, cutting tool coatings, hardmetal recycling, corrosion and wear behaviour, and sustainable binder alternatives.
Hard Metals & Cermets – Euro PM2026 Papers
A Reactive Sintering Strategy To Design Sustainable Cermets
→ Dipl-Ing Ziegler Maximilian (Universidad Carlos III de Madrid, Spain)
Abrasive Wear Damage Of WC-Co And WC-Co-γ Hardmetals
→ Dr Ing Cinca Núria (Hyperion, Spain)
Advances In A Hydrometallurgical Process With Organic Acids For A Wide And Eco-friendly WC-Co Scraps Recyclability
→ Dr Ing Cera Martina (University of Cagliari, Italy)
Comparison Of The Sintering Behavior Of Different WC-10 Wt.%Co Recycled Powders: Zinc Reclaim (ZR) Vs. Oxidation-reduction-carburization (ORC) Processes
→ Ms Muñoz Ortuño Lucía (CEIT, Spain)
Corrosion Behavior Of PM-HIPed Stainless Steel With High-Nitrogen In Acidic Aqueous Environments
→ Prof Kim Sung Jin (Sunchon National University, Korea)
Data-Driven Composition – Processing – Microstructure – Property Correlations In Ti(C,N)-based Cermets
→ Mr Biedma Ángel (UC3M, Spain)
Assessing The Potential For Repurposing Industrial Press And Sinter WC-Co Grades For Binder Jetting Fabrication
→ Mr Leite Francisco (University of Aveiro, Portugal)
Design Of Fe-based Cemented Carbides With Enhanced Toughness
→ Dr Chychko Andrei (Sandvik Coromant, Sweden)
Cobalt Incorporation In 3D-Printed Zirconia Catalysts: From Support Coating To Single-Step Direct-Ink Writing
→ Dr Fargas Ribas Gemma (UPC, Spain)
Development Of Hard Metals By SPS Using Recycled WC Powders
→ Mr Shi Qile (IMDEA Materials Institute, Spain)
Edge Toughness Assessment Of Hardmetals
→ Ms Marvaldi Fanny (UPC, Spain)
Effect Of Corrosive Environments On The Mechanical Behavior Of WC-6Co Hardmetals
→ Mrs Koochakiabkenar Atieh (RWTH Aachen, Germany)
Effects Of Cubic Boron Nitride Content On Mechanical Properties Of PcBN Materials Containing VN|Al₂O₃ Binders
→ Mr Khan Tamhasip (Element Six, Ireland)
Enhanced Properties Of Hard Alloys Based On Tungsten Carbide Using Spark Plasma Sintering Technology: From Raw Powder To A High-performance Cutting Tool
→ Dr Fregeac Arnaud (Norimat, France)
Evaluation Of TiCN And α-Al₂O₃ Grain Boundaries In CVD Coated WC-Co Hardmetal Using Microcantilever Testing And FEM
→ Mr Suri Ujjwal (IAPK, RWTH Aachen, Germany)
Highly Automated Thermoprocessing Solutions For The Carburization Of Tungsten Powder
→ Dr Kahl Stefan (SAB, Austria)
Influence Of Heat Treatment On The Properties Of A Ti6Al4V-10wt%WC Metal Matrix Composite Fabricated Using Selective Laser Melting
→ Prof Sacks Natasha (Stellenbosch University, South Africa)
Influence Of Heat Treatments On The Mechanical Properties Of TiC-Fe-Cr-Mo Cermets
→ Ms Muñoz Ortuño Lucía (CEIT, Spain)
Life Cycle Assessment Of Cemented Carbide Cutting Tool Production: Environmental Hotspots And Improvement Strategies
→ Miss Gonçalves Rodrigues Beatriz (FEUP, Portugal)
New Insights In The Electrochemical Demolition Of HM Hard Scrap
→ Dr De Gaudenzi Gian Pietro (OMCD, Italy)
Particle Size, Grain Size, And Powder Morphology During Oxidation And Reduction Of Recycled Hard Metals And Other W-containing End Of Life Products
→ Dr Bjerke Axel (HILAB, Italy)
PH-Dependent Corrosion Of WC Hardmetals With Ni-Based Binders In Acidic Chloride Media
→ Mr Okhiria Paul (University of Aveiro, Portugal)
Properties Of Hardmetals From Reclaimed WC-Co Powders Produced By Different Recycling Methods
→ Dipl-Ing Vornberger Anne (Fraunhofer IKTS, Germany)
Single And Repetitive Thermal Shock Of WC-Co Cemented Carbides: Microstructural Effects On Surface And Mechanical Integrity
→ Prof Llanes Luis (UPC, Spain)
Sustainable Eta-phase Reinforced Co-free Cemented Carbides: Mechanical Properties At Room And High Temperatures
→ Dr Garcia Jose Luis (Sandvik Coromant AB, Sweden)
Sustainable PTA-processed FeCrV-powder With Carbide Reinforcement As A Resource-efficient Alternative To WSC-based Systems
→ Prof Dr Gevelmann Gerhard (University of Applied Sciences Muenster, Germany)
The Effect Of C-BN Reinforcement On The Mechanical Properties Of Y-TZP Ceramics
→ Miss Henriques Ana (University of Aveiro, Portugal)
The Role Of Excess Cr In High Binder Content WC-CoNiCr Hardmetals
→ Dipl-Ing Pinto Mariana (University of Aveiro, Portugal)
Ti-xWC Composite System Prepared By Mechanical Alloying And Hot Pressing: Microstructure And Mechanical Properties Evaluation
→ Prof Dr Miklaszewski Andrzej (Poznan University of Technology, Poland)
SPS / FAST
Spark plasma sintering and field-assisted sintering technology (FAST) applied to advanced materials, scale-up processes, fusion energy components, and novel materials including HEAs and refractory metals.
SPS / FAST – Euro PM2026 Papers
Development Of Hard Metals By SPS Using Recycled WC Powders
→ Mr Shi Qile (IMDEA Materials Institute, Spain)
Enhanced Properties Of Hard Alloys Based On Tungsten Carbide Using Spark Plasma Sintering Technology: From Raw Powder To A High-performance Cutting Tool
→ Dr Fregeac Arnaud (Norimat, France)
A Modular Additive Sintering Concept For Functionally Integrated Components
→ Dipl-Ing Hutsch Thomas (Fraunhofer IFAM Dresden, Germany)
Influence Of Process Parameters And Tools Design On Temperature Homogeneity During Large-scale Synthesis Of MAX Phase By FAST|SPS
→ Mr Wisniewski Jakub (Łukasiewicz Research Network – Poznań Institute of Technology, Poland)
Scaling Up Spark Plasma Sintering For High-Density Tungsten Tiles And Multilayer W-Cu Structures
→ Dr Lagos Miguel (TECNALIA, Spain)
Processing Of Plasma Facing Components For Fusion Power Plants By Field Assisted Sintering Technologies
→ Ms Binu Varghese Aparna (Institute of Energy Materials and Devices IMD-2, Forschungszentrum Jülich, Germany)
Screen-Printed Sacrificial Structures For High-Thermal-Conductivity Copper-Diamond Heat Sinks
→ Dipl-Ing Hutsch Thomas (Fraunhofer IFAM Dresden, Germany)
Upscaling And Commercialisation With FAST-ESF Single Step Consolidation: Productivity, Quality, Sustainability, Applications
→ Dr Ing Zeller Andreas (EPoS Technologies SA, Switzerland)
Ultrafast High-Temperature Sintering: A Novel Processing Approach For Metallic Alloys
→ Dr Daudt Natalia (Universidade Federal de Santa Maria, Brazil)
Spark-Plasma-Sintered AlCoCrFeNiTiSi HEAs As Bond Coats For Advanced Thermal Barrier Coatings
→ Dr Frutos Torres Emilio (Universidad Complutense de Madrid, Spain)
Microstructure And Mechanical Properties Of CoCrFeNiMn High-entropy Alloy Compacts Strengthened By Niobium Carbides
→ Prof Dr Karlik Miroslav (Czech Technical University in Prague, Czech Republic)
Influence Of Processing Route And Stacking Fault Energy (SFE) On Hydrogen Resistance
→ Prof Dr Alvaredo Olmos Paula (Universidad Carlos III de Madrid, Spain)
Hot Isostatic Pressing
HIP as a standalone densification process and as a post-treatment for AM and PM components — covering nickel superalloys, steels, titanium alloys, microstructure evolution, ductility improvement, and surface finishing.
Hot Isostatic Pressing – Euro PM2026 Papers
Corrosion Behavior Of PM-HIPed Stainless Steel With High-Nitrogen In Acidic Aqueous Environments
→ Mr Kim Yong Hyun (Sunchon National University, Korea, Republic of)
Aluminium Scandium Alloys Development For Hydrogen Applications
→ Mr Delignon Benjamin (Gränges Powder Metallurgy, France)
Tailoring IN718 Alloy Chemistry To Enhance Ductility In NSHIP Processed Parts
→ Dr Aristizabal Miren (CEIT-BRTA, Spain)
Oxide-reduction Strategies To Improve Ductility Of Components Manufactured Via Hot Isostatic Pressing (HIP)
→ Dr Gil Roberto (The MTC Ltd, United Kingdom)
On The Distribution Of Argon In PM HIP Material, And Creation Of A Reference Material At A Suitable Level
→ Dr Shipley Jim (Quintus Technologies AB, Sweden)
Micromechanical Characterization Of PM-HIP High-speed Steel By Micro Tensile Testing
→ Mr Gertlowski Leonhard (Institute for Materials Applications in Mechanical Engineering, Germany)
Investigation Of A Novel Powder-metallurgical Processing Route For The Additive Manufacturing Of High-nitrogen Martensitic Stainless Steels
→ Ms Garthe Sophia (Chair of Materials Technology, Ruhr-University Bochum, Germany)
Microstructure Evolution Following HIP Post-treatment Of LPBF-processed Ti-6Al-4V Reinforced With Nano Yttria-stabilized Zirconia For Structural Applications
→ Dr Hocini Azziz (LSPM Laboratory – CNRS UPR3407, France)
Orbital Friction Processing Of High Strength Steels And Alloys For PM, AM & HIP Applications
→ Mr Jackman Stuart (Jackweld Limited, United Kingdom)
Removal Of The PBF-LB Fraction From PM HIP Powder, And Its Effect On PM HIP Material Properties
→ Dr Mellin Pelle (Swerim AB, Sweden)
Surface Finishing Of PBF-LB Stainless Steels Using Chemical And Chemical-Mechanical Polishing In Combination With Hot Isostatic Pressing (HIP) For Improved Mechanical Performance
→ Dr Diaz Agustin (REM Surface Engineering, USA)
Development Of 718 Nickel Superalloy Via PM-HIP For Energy Application
→ Dr Hao Xinjiang (Globus Metal Powders Ltd, United Kingdom)
The Role Of The PBF-LB Scanning Strategy In The Fatigue Performance Of HIP-Densified Duplex Steel Shell-Core Structures
→ Mr Koob Jonas S. (Institute for Materials Applications in Mechanical Engineering at RWTH Aachen University, Germany)
Metal Injection Moulding
MIM process development, feedstock and binder systems, sintering models, fatigue and mechanical performance, and comparison with emerging sinter-based AM processes.
Metal Injection Moulding – Euro PM2026 Papers
Advancing Metal Injection Moulding For Underexplored Superalloys: Hastelloy C-22
→ Prof Dr Herranz Gemma (Universidad de Castilla-La Mancha, Spain)
Comparison Of MIM And Binder Based Additive Manufacturing (FGF) For Processing The Complex Mg-Alloy Mg-1.8Y-1.6Gd-0.4Ca-1Ag-0.6Zn For Biomedical Applications
→ Dipl-Ing Wolff Martin (Helmholtz-Zentrum Hereon, Germany)
Experimental Derivation And Application Of A Physically-motivated Sintering Model For X2CrNiMo17-10-2 Steel Processed By MIM
→ Mr Schenk Oliver (RWTH Aachen University, Institute for Materials Applications in Mechanical Engineering, Germany)
Impact Of Part Geometry And Gate Location On Green Part Quality In Metal Injection Moulding
→ Mr Maetzig Marko (ARBURG GmbH + Co KG, Germany)
Influence Of Porosity On The Fatigue Strength Of MIM Sintered Components
→ Mr Weck Christian (Fraunhofer IFAM, Germany)
Performance Of In Situ Lubrication Of Porous PM Blanks In Cold Forming
→ Mr Piwek Armin (Institut für Umformtechnik und Umformmaschinen, Germany)
MIM And Heat Treatment Of NiTi Superelastic Alloys
→ Mr Rodriguez-Arbaizar Mikel (University of Applied Sciences and Arts Western Switzerland, Switzerland)
Microstructure-Driven Qualification Of Sintered Titanium In MIM, LMM, And CMF
→ Ing Marter Tim (Element 22 GmbH, Germany)
Comparison Of Different Specimen Geometries For Fatigue Testing Of MIM-produced Ti Al6 V4
→ Dipl-Ing Limberg Wolfgang (Helmholtz-Zentrum Hereon, Germany)
Binder-based Production Of Hard Magnets
→ Dr Kukla Christian (Montanuniversitaet Leoben, Austria)
Resource-Efficient Iron Powder For Powder Metallurgy And Energy Storage
→ Dipl-Ing Walther Gunnar (Fraunhofer IFAM, Dresden Branch, Germany)
Automotive
PM components for automotive drivetrains, e-mobility, gears, sintered structural parts, surface densification, and innovative magnetic materials for electric motors.
Automotive – Euro PM2026 Papers
Hybrid Powder Metallurgical Production Of Heat Sinks Based On The Locally Dominant Heat Transport Mechanism
→ Dr Ing Schneider Markus (GKN Powder Metallurgy, Germany)
Innovative Magnetic Materials For E-mobility
→ Prof Dr Poskovic Emir (Politecnico di Torino, Italy)
Improvement Of The Properties Of Recycled NdFeB Sintered Magnets For More Sustainable Products Through Adjustment Of Particle Size Distribution And Purification Of Fine Powders
→ Dr Ing Schönfeldt Mario (Fraunhofer IWKS, Germany)
Upscaling And Commercialisation With FAST-ESF Single Step Consolidation: Productivity, Quality, Sustainability, Applications
→ Dr Ing Zeller Andreas (EPoS Technologies SA, Switzerland)
Advanced Hybrid Alloyed PM Steels Sintered In The 1140°C Range
→ Prof Dr Danninger Herbert (Technische Universitaet Wien, Austria)
Characterization And Fatigue Performance Of A Case-hardened Cr-prealloyed PM Steel At Different Sintering Temperatures
→ Mr Botermans Cornelis (Höganäs Sweden AB, Sweden)
Methods For Improving The Operational Behavior Of Binder Jetting Gears Made Of 17-4 PH
→ Mr Breuer Emil-Elias (MTI of RWTH Aachen, Germany)
Application Of Surface Densification Process Design To E-Drive Intermediate Gear
→ Dr Ing Scholzen Philipp (Höganäs Germany GmbH, Germany)
Tooth Flank Load Capacity Of Powder Metal Gears With Local Density Profile
→ Mr Hellenbrand Gerrit (WZL – RWTH Aachen, Germany)
Aerospace
Titanium alloys, nickel superalloys, ODS alloys, and structural PM components for aerospace applications — from powder production and processing to qualification and performance testing.
Aerospace – Euro PM2026 Papers
Advancing Metal Injection Moulding For Underexplored Superalloys: Hastelloy C-22
→ Prof Dr Herranz Gemma (Universidad de Castilla-La Mancha, Spain)
A Comparative Study Of Microstructure And Mechanical Properties Of 300M Steel Produced By Coaxial Laser Directed Energy Deposition Using Powder And Wire
→ Dr Bhattiprolu Satish (TWI Technology Centre, United Kingdom)
Advancing Green Titanium Production: Characterization And Processing Performance Of Velta Ti-Derived Powders
→ Dr Checa Luna (TECNALIA, Spain)
Building A Framework For ODS Alloy Design: A Case Study For ODS Hastelloy X
→ Mr Aydemir Abdullah (Empa, Swiss Federal Laboratories for Materials Science and Technology, Switzerland)
A Novel Approach To Comparing Powder Metallurgy And Forged Titanium Alloys For Aerospace Applications
→ Ms Sahin Gul Cagri (Parsan Machine Parts Industry Co. – Gebze Branch, Turkey)
Powder Metallurgy In Foundry Production From Mg-Al-Zn-Mn Aerospace Grade Alloy Doped With Single Wall Carbon Nanotubes
→ Mr Makovskyi Spartak (Motor Sich JSC, Ukraine)
Manufacturing Of Complex Aircraft Engine Components Via MoldJet: CM247LC Nickel Superalloy Feedstock Development And Property Evaluation
→ Dipl-Ing Herzer Niklas (Fraunhofer IFAM Dresden, Germany)
Material Extrusion Of Titanium Metastructures For Next-Generation Aerospace Components
→ Ing García Álvaro (Universidad de Castilla-La Mancha, Spain)
Functional Materials
Soft magnetic composites, electrical steel sheets, thermal management materials, coatings, copper-graphene composites, shape memory alloys, and multifunctional PM-processed materials.
Functional Materials – Euro PM2026 Papers
Binder-based Production Of Hard Magnets
→ Dr Kukla Christian (Montanuniversitaet Leoben, Austria)
Screen-Printed Sacrificial Structures For High-Thermal-Conductivity Copper-Diamond Heat Sinks
→ Dipl-Ing Hutsch Thomas (Fraunhofer IFAM Dresden, Germany)
Additive Manufacturing Of NiTi-Based Shape Memory Alloys For Functional Components
→ Dr Lupi Giorgia (Politecnico di Milano, Italy)
Hybrid Powder Metallurgical Production Of Heat Sinks Based On The Locally Dominant Heat Transport Mechanism
→ Dr Ing Schneider Markus (GKN Powder Metallurgy, Germany)
Innovative Magnetic Materials For E-mobility
→ Prof Dr Poskovic Emir (Politecnico di Torino, Italy)
Magnetic Field-Assisted Additive Manufacturing Of Anisotropic Permanent Magnets
→ Dipl-Ing Valy Lilla (RHP-Technology, Austria)
Manufacturing Of Spinodoid Structures Using Laser Powder Bed Fusion
→ Ms Kancharla Deekshitha (Technical University of Dresden | Fraunhofer-Institute of Materials and Beam Technology, Germany)
Development Of Copper-Graphene Composites Via Powder Metallurgy For Advanced Thermal Management
→ Dr Vladu Ioana Carmen (RHP Technology GmbH, Austria)
Effect Of Biotite Content And Processing Parameters On Powder Morphology And Pressability Of Fe|biotite Soft Magnetic Composites
→ Ing Kostiuk Vladyslav (Institute of Materials Research, Slovak Academy of Sciences, Slovakia)
A Comparative Discussion On The Influence Of Heat Treatment On PM Soft Magnetic Composites (SMCs) For High-Frequency AC Applications
→ Mr Mohan Vignesh (Technische Universitaet Wien, Austria)
Alloy Development Of Sinter-based Iron-cobalt Electrical Steel Sheets
→ Mr Thamm Merlin (Fraunhofer IFAM, Germany)
From Preforms To Powders: Assessing Ultrasonic Atomization For Production Of Nanocrystalline Soft Magnetic Alloys
→ Mr Nahringbauer Peter (TU Wien, Austria)
Multi-layered Coating Production Through Laser Processing Of Inconel-loaded Polymer Films
→ Mr Matos Carlos (University of Aveiro, Portugal)
Improvement Of The Properties Of Recycled NdFeB Sintered Magnets For More Sustainable Products Through Adjustment Of Particle Size Distribution And Purification Of Fine Powders
→ Dr Ing Schönfeldt Mario (Fraunhofer IWKS, Germany)
The 2-Powder Method For Producing Resource-saving And More Sustainable NdFeB Magnets
→ Dr Ing Opelt Konrad (Fraunhofer IWKS, Germany)
Development Of Phase Diagrams For The Design Of HDDR Cycles To Induce Anisotropy In Recycled Gas Atomized Nd-Fe-B Powders
→ Mr Monzón Martín Diego (CEIT-BRTA, Spain)
Plasma Powder Deposition Of Functional Metallic And Magnetic Coatings On Polymeric Substrates
→ Mr Curti Pier Paolo (RHP Technology GmbH, Austria)
Processability Of AlNiCo 8 Magnets Via Laser Powder Bed Fusion Additive Manufacturing
→ Dr Reijonen Joni (VTT Technical Research Centre of Finland Ltd., Finland)
High-Entropy Alloy-Based Thermo-Magnetic Power Generators For Energy Conversion
→ Prof Dr Colombini Elena (Università degli Studi di Parma, Italy)
Sinter-based And Powder Bed Fusion Additive Manufacturing Of Fe6.5Si
→ Prof Dr Carreno-Morelli Efrain (University of Applied Sciences and Arts Western Switzerland, Switzerland)
Surface Modification Of Metal Parts Using DED Method
→ Dr Kim Hyun-Gil (InssTek, Inc., Korea, Republic of)
DED
Directed energy deposition processes — laser DED, wire-based DED, and plasma-based AM — for repair, cladding, multi-material deposition, and alloy development using powder or wire feedstocks.
DED – Euro PM2026 Papers
Compositionally Controlled Spray-dried Feedstock Powders For In-situ Alloying Via L-DED
→ Dr Calisir Ilkan (PowderLoop Technology Limited, United Kingdom)
Ultrasonic Atomization Of Recycled Aluminum Feedstock: From Single Alloy Scrap To Cross-Scrap Alloy For Plasma- And Powder-based Directed Energy Deposition
→ Mr Vieweger Daniel (Technische Universität München, Germany)
A Comparative Study Of Microstructure And Mechanical Properties Of 300M Steel Produced By Coaxial Laser Directed Energy Deposition Using Powder And Wire
→ Dr Bhattiprolu Satish (TWI Technology Centre, United Kingdom)
CALPHAD-Guided Ultrasonic Atomisation Of Novel Lead-Free Brass Powders For DED Applications
→ Ing Ribeiro Bernardo L. (DEMM | FEUP, Faculty of Engineering, University of Porto, Portugal)
Centrifugally Atomized Powder Performance In Traditional And Large-Format Powder Bed Fusion And Directed Energy Deposition Applications
→ Mr Hash Mark (Ervin Industries, USA)
Combinatorial Development Of Al-based Alloys Using DED Technology
→ Dr Reverte Palomino Eduardo (Institut Jean Lamour, University of Lorraine, France)
Comparative Study On DED-LB|M Processing Of The Martensitic Hardenable Tool Steel X38CrMo7-2 Using Flux-Cored Wire- And Powder-Based Feedstock
→ Mr Hann Jonathan (University of Wuppertal, Germany)
Integrated Alloy Design And Additive Manufacturing Of Low-Density Fe-Mn-Al-Ni-Cr-C Steel: Gas Atomization, Laser Directed Energy Deposition, And Microstructure-Property Relationships
→ Dr Ali Mohammed (VTT Technical Research Centre of Finland Ltd, Finland)
Mitigation Of Carbon-Induced Cracking In LP-DED Repair Of Ductile Cast Iron Components Using Buffer Layers And Graded Deposition Strategies
→ Dr Amirabdollahian Sasan (Trentino Sviluppo (ProM Facility), Italy)
Surface Modification Of Metal Parts Using DED Method
→ Dr Kim Hyun-Gil (InssTek Inc., Republic of Korea)
Medical & Biomedical
PM and AM processing for medical implants, biodegradable Mg alloys, shape memory NiTi, titanium scaffolds, and topology-optimised personalised prostheses.
Medical & Biomedical – Euro PM2026 Papers
<strong>Comparison Of MIM And Binder Based Additive Manufacturing (FGF) For Processing The Complex Mg-Alloy Mg-1.8Y-1.6Gd-0.4Ca-1Ag-0.6Zn For Biomedical Applications</strong>
→ Dipl-Ing Wolff Martin (Helmholtz-Zentrum Hereon, Germany)
<strong>Microstructure-Driven Qualification Of Sintered Titanium In MIM, LMM, And CMF</strong>
→ Ing Marter Tim (Element 22 GmbH, Germany)
<strong>Lithography Based Metal Manufacturing For Endoprosthesis Applications</strong>
→ Dr Sinawehl Lisa (Incus GmbH, Austria)
<strong>Hot Extrusion And Sub-zero Temperature Quenching Of CNT-Reinforced Powder Metallurgy TiNi SMA For Biomedical Applications</strong>
→ Dr Elsayed Ayman (Central Metallurgical Research and Development Institute, Egypt)
<strong>Topology Optimization – Design Of Personalized Osteosynthesis Implants Via Additive Manufacturing</strong>
→ Dr Viderscak Dalibor (University of Zagreb Faculty of Mechanical Engineering and Naval Architecture, Croatia)
Energy
A prominent new theme at Euro PM2026: PM solutions for hydrogen electrolysis, energy storage, fusion power, thermoelectric generation, and high-performance alloys for energy-sector applications.
Energy – Euro PM2026 Papers
Improvement Of The Properties Of Recycled NdFeB Sintered Magnets For More Sustainable Products Through Adjustment Of Particle Size Distribution And Purification Of Fine Powders
→ Dr Ing Schönfeldt Mario (Fraunhofer IWKS, Germany)
Upscaling And Commercialisation With FAST-ESF Single Step Consolidation: Productivity, Quality, Sustainability, Applications
→ Dr Ing Zeller Andreas (EPoS Technologies SA, Switzerland)
High-Entropy Alloy-Based Thermo-Magnetic Power Generators For Energy Conversion
→ Prof Dr Colombini Elena (Università degli Studi di Parma, Italy)
Resource-Efficient Iron Powder For Powder Metallurgy And Energy Storage
→ Dipl-Ing Walther Gunnar (Fraunhofer IFAM, Dresden Branch, Germany)
Corrosion Behavior Of PM-HIPed Stainless Steel With High-Nitrogen In Acidic Aqueous Environments
→ Mr Kim Yong Hyun (Sunchon National University, Korea, Republic of)
Aluminium Scandium Alloys Development For Hydrogen Applications
→ Mr Delignon Benjamin (Gränges Powder Metallurgy, France)
Development Of 718 Nickel Superalloy Via PM-HIP For Energy Application
→ Dr Hao Xinjiang (Globus Metal Powders Ltd, United Kingdom)
Influence Of Processing Route And Stacking Fault Energy (SFE) On Hydrogen Resistance
→ Prof Dr Alvaredo Olmos Paula (Universidad Carlos III de Madrid, Spain)
Evaluation Of In-situ PBF-LB Developed Alloys For Hydrogen-rich Environments
→ Dr Gil Murillo Emma (Lortek, Spain)
Development And Characterization Of Powder-Derived Nickel-Based Porous Transport Layers For Anion Exchange Membrane Water Electrolysis
→ Mr Gabriel Rimy (Forschungszentrum Jülich, IMD-2, Germany)
Scalable Powder-Metallurgical Coating Of Metallic Foams For Alkaline Electrolysis
→ Dr Ing Lindemann Inge (Fraunhofer IFAM, Germany)
Sustainability
A growing priority at Euro PM2026: recycling of powder feedstocks, upcycling machining chips, LCA studies, carbon footprint reduction, green titanium production, and circular economy approaches in PM.
Sustainability – Euro PM2026 Papers
Improvement Of The Properties Of Recycled NdFeB Sintered Magnets For More Sustainable Products Through Adjustment Of Particle Size Distribution And Purification Of Fine Powders
→ Dr Ing Schönfeldt Mario (Fraunhofer IWKS, Germany)
Advancing Green Titanium Production: Characterization And Processing Performance Of Velta Ti-Derived Powders
→ Dr Checa Luna (TECNALIA, Spain)
A Reactive Sintering Strategy To Design Sustainable Cermets
→ Dipl-Ing Ziegler Maximilian (Universidad Carlos III Madrid, Spain)
Advances In A Hydrometallurgical Process With Organic Acids For A Wide And Eco-friendly WC-Co Scraps Recyclability
→ Dr Ing Cera Martina (University of Cagliari, Italy)
Assessing The Potential For Repurposing Industrial Press And Sinter WC-Co Grades For Binder Jetting Fabrication
→ Mr Leite Francisco (University of Aveiro, Portugal)
Life Cycle Assessment Of Cemented Carbide Cutting Tool Production: Environmental Hotspots And Improvement Strategies
→ Miss G. Rodrigues Beatriz (DEMec, Faculty of Engineering, University of Porto, Portugal)
Properties Of Hardmetals From Reclaimed WC-Co Powders Produced By Different Recycling Methods
→ Dipl-Ing Vornberger Anne (Fraunhofer IKTS Dresden, Germany)
Sustainable Eta-phase Reinforced Co-free Cemented Carbides: Mechanical Properties At Room And High Temperatures
→ Dr Garcia Jose Luis (Sandvik Coromant AB, Sweden)
Sustainable PTA-processed FeCrV-powder With Carbide Reinforcement As A Resource-efficient Alternative To WSC-based Systems
→ Prof Dr Gevelmann Gerhard (University of Applied Sciences Muenster, Germany)
Upcycling Aluminium Machining Chips Into Powder Feedstock: Effect Of Chip Apparent Density On Milling Performance
→ Dr Emadinia Omid (INEGI – Institute of Science and Innovation in Mechanical and Industrial Engineering, Portugal)
Carbon Footprint Of Continuous Metal Powder Production For Additive Manufacturing
→ Mr Mostaghimi Farhad (SMS group GmbH, Germany)
Compositionally Controlled Spray-dried Feedstock Powders For In-situ Alloying Via L-DED
→ Dr Calisir Ilkan (PowderLoop Technology Limited, United Kingdom)
Definition Of Tolerance Bands Of Powder Quality In Metal Additive Manufacturing For Designing Reconditioning Processes
→ Dr Maurer Oliver (Saarland University, Germany)
Industry 5.0 And Powder-Based Additive Manufacturing: Towards Human-centered And Sustainable Innovation
→ Mrs Ukwu Cynthia (University West, Sweden)
Comparative Study Of Tool Steel Powders Produced From Machining Chips By Mechanical Milling And Ultrasonic Atomization For MEX
→ Dr Batista Catarina (CDRSP – Center for Rapid and Sustainable Product Development, Polytechnic University of Leiria, Portugal)
Closing The Loop In Sustainable Titanium Production: By-Product Characterisation And Circular Valorisation Within The Eurotitan Process
→ Dr Bellver Baca Maria Teresa (SIKA, Switzerland)
Investigation Of The Climate Impact Of Pressed And Sintered Components
→ Mr Lopez Londoño Bryan (Höganäs AB, Sweden)
Metal-from-waste Processing In Perfect “health”: AI-optimized Titanium Extraction In Closed Loop
→ Dr Babagiannou Rosanna (SAIS LAB, Greece)
Comparative Life Cycle And External Cost Assessment Of Titanium Metal Powder Production: Conventional Kroll-HDH Versus The Eurotitan Route
→ Ms Baria Yashvi (RWTH Aachen University, Germany)
Recycling And Characterization Of AlSi7Mg And AlSi10Mg AM Rest Material For Powder Production And Reuse In Additive Manufacturing
→ Dr Ing Brabie Liviu (Swerim AB, Sweden)
Development Of Environmentally Sustainable Powder Metallurgy Steels Through Manganese Alloying
→ Mr Lorenzon Ivan (Pometon SpA, Italy)
The PAM-EIGA Processing Route For Production And Recycling Of High-quality Metallic Powders
→ Dr Ing de La Rochefoucauld Emmanuel (IRT M2P, France)
From Machining Chips To Powders: Conventional And Cryogenic Milling Of Ferrous And Non-Ferrous Alloys
→ Dr Oliveira Gonçalo (CEMMPRE-ARISE, University of Coimbra, Portugal)
Sustainable Graphite For Powder Metallurgy
→ Dr Gilardi Raffaele (Imerys Graphite & Carbon, Switzerland)
In-Situ Alloying From Powder Blends For Sustainable Alloy Prototyping And Production
→ Mr Moronczyk Bartosz (AMAZEMET Sp. z o.o., Poland)
Sustainable Production Of M300-Equivalent Maraging Steel From Recycled Scrap Via G-MEX
→ Mr Caballero García Gabriel José (Universidad Carlos III de Madrid, Spain)
Ultrasonic Atomization Of Recycled Aluminum Feedstock: From Single Alloy Scrap To Cross-Scrap Alloy For Plasma- And Powder-based Directed Energy Deposition
→ Mr Vieweger Daniel (Technische Universität München, Germany)
Papers by Material Family
In addition to the technology-based tracks above, Euro PM2026 features dedicated sessions on metals and alloys across all processing routes. Explore contributions by material family:
Carbon steel
Low-carbon steel
Tool steels
D2 tool steel
H13 tool steel
Dievar hot-work tool steel
Maraging steel
Maraging steel 18Ni-300
MAR-50 maraging steel
MAR-60 maraging steel
Grade 91 ferritic-martensitic steel (G91)
Duplex stainless steel
Austenitic stainless steel
316L stainless steel
17-4PH stainless steel
15-5PH stainless steel
Nitronic® 50 stainless steel
High-nitrogen martensitic stainless steel
Cronidur® 30 (X30CrMoN15)
X38CrMo7-2 tool steel
X40CrMoV12-2 tool steel
X35CrMoV5-2 tool steel
X40CrMoV15-1 steel
Fe-Cr-Mn-Si-B steel
Fe-Cr-V steel
Titanium alloys
Ti-6Al-4V
Ti-6242 (Ti-6Al-2Sn-4Zr-2Mo)
Ti-6242S
Ti-33Nb-33Zr alloy
β-titanium alloys
Ti-xWC composites
Titanium hydride-based alloys
Inconel 718
Inconel 625
IN713C
Hastelloy X
ODS Hastelloy X
AlNiCo alloy
AlNiCo 8 permanent magnet alloy
Cobalt-based alloys
Co-free alloys
Aluminium alloys
AlSi10Mg
AlSi7Mg
Al-Mg-Sc alloy
Aluminium-Scandium (Al-Sc) alloys
Al-Ti-Mg alloy
Al-Ti-Mg-B modified alloys
Al-Sc-Mg alloy
Tungsten carbide (WC)
WC-Co hardmetal
WC-6Co
WC-10Co
WC-Ni
WC-NiCr
WC-CoNiCr
WC-FeMn composites
WC-Fe-based composites
Cemented carbides
Fe-based cemented carbides
Co-free cemented carbides
Cermets
Ti(C,N)-based cermets
TiC-Fe-Cr-Mo cermets
Titanium carbide (TiC)
Chromium carbides
Vanadium carbides (VC)
MC carbides
NbC (niobium carbide)
TiB₂
High-entropy alloys (HEAs)
CoCrFeNiMn HEA
CrFeMnNi HEA
AlCoCrFeNiTiSi HEA
Ti-Ta-Nb-Mg-Ag HEA
Refractory high-entropy alloys (RHEAs)
CrMoNbTaTiZr HEA
Pure copper
Copper alloys
Bronze
Fine bronze
Cu-graphene composites
Copper-based composites
Magnesium alloys
Mg-Al-Zn-Mn alloy
Mg-Y-Gd-Ca-Ag-Zn biodegradable alloy
Fe-based alloys
Fe-Mn-based alloys
Fe-Ni-Cr binder alloys
Soft magnetic steels
Fe-Si electrical steel
Fe-6.5Si alloy
Iron-cobalt (Fe-Co) alloys
Nd-Fe-B alloys
SmCo alloys
Permanent magnet alloys
Y-TZP ceramics
Alumina-toughened zirconia (ATZ)
Cubic boron nitride (c-BN) reinforced systems
SiC-based systems
Browse the complete scientific programme, including session schedules, room assignments, presenter details, and abstracts. Registration is required to access the full programme portal.